DIT Master Specification

Specifications are grouped into eight categories with multiple parts:

Each specification part may consist of a Technical Specification, with reference to Standards and legislation with supplements as required. Because many parts of the Master Specification cross-reference each other, individual parts are rarely used in isolation.

The Master Specification parts will also often reference DIT Test Procedures, the DIT Approved Products List and other Technical Standards and Guidelines.

If you are contracted to DIT, the relevant parts of the Master Specification will be included in the Technical Requirements section of the Contract Scope and Contract Requirements (CSCR),

All current parts of the Master Specification are available on this site.

Yes; you are welcome to make comments and provide feedback regarding any of the parts. Please contact your Contract Manager, or email your feedback to DIT.MasterSpecification@sa.gov.au.

You may copy and use these specifications; however, if you use these documents for any purpose which is not consistent with the above (in particular, using them in contracts where the Commissioner of Highways or Minister of Transport is not the Principal), you do so at your own risk.

The Department makes no representations or warranty that the Specifications have been prepared with reasonable care and does not assume a duty of care to you. DIT has no responsibility to inform you of any matter coming to DIT's notice which may affect the quality of the Specifications in any way. By downloading any specification from this site, you acknowledge and agree to DIT's website disclaimer.

Some documents on this page do not meet Web Content Accessibility Guidelines (WCAG 2.1). If you have difficulty accessing information in these documents, please email DIT.MasterSpecification@sa.gov.au.